New: cedar raised beds and planter boxesFounding price ends
240 Ellwood Drive West, Bolton, ON · Monday to Friday 9:00 to 5:00Free pickup · Delivery within about 100 km ($200 per 40 panels)647-569-2163
Price a fenceCart

Pressure-Treated Lattice Top

Shadowbox fence panel, lattice top, finished both sides.

Availability
● In stock, pickup in Bolton
Price
$149.99 per panel
plus 13% HST at checkout
SKU
NS-515

Pickup at NorthStar Building Products, 240 Ellwood Drive West, Bolton, ON L7E 4W6: in stock, ready next business day (Monday to Friday, 9:00 to 5:00). Come and see one at the yard first if you like.

5.0 on Google from 8 reviews by fence panel customers, checked 28 September 2026

True size 72″ × 96″

“6 ft × 8 ft” is the nominal trade size. Measure your run against the true dimensions before ordering.

Need a different width or height, or a matching gate? Built to order and quoted by hand. Ask for a custom quote.

Pay online and pick up at our Bolton yard. We confirm a time before you drive out.
Complete your fence

Posts for this run.

1 panel in one straight run hangs on 2 posts at 96 in. on centre: one at each end and one between every pair.

Post size
2 × Pressure-Treated 4×4 Fence Post, 10 ft: $37.58 plus HST

Posts are pickup-only. If you want the panels delivered, pick posts up separately or call 647-569-2163 for a lumber delivery quote.

Corners and gates change the count. Price the whole run in the fence calculator.

About this panel

Why we built it this way.

The good-neighbour build in brown pressure-treated: boards alternate from side to side of the rail (the shadow box pattern), so the panel is finished on both faces and neither yard gets the bad side. A diagonal lattice crown keeps the top line light, and the top rail runs the full width of the panel, end to end.

Honest about what shadowbox is: semi-privacy, not a solid wall. Straight on it reads private; at a sharp angle there’s a narrow sight line, and the staggered gaps bleed wind instead of catching it. If the job needs zero sight lines, that’s our Pressure-Treated Privacy panel.

The brown colour is built into the treatment, so no staining is needed, and if you stain anyway, wait four to six weeks for the wood to dry down first. Fasten with hot-dipped galvanised or stainless hardware and coat any cut ends. 100% Canadian-made. Matching gates and custom heights and sizes on request.

Specifications
Item
NS-515
Size
6 ft × 8 ft (true 72″ × 96″)
Face
Shadowbox, semi-privacy, finished both sides
Top
Diagonal lattice crown
Treatment
Brown pressure-treated
Colour
Built-in brown, no staining needed
Options
Matching gates · custom heights & sizes
Origin
100% Canadian-made
Questions about this panel

Before you order.

Does this panel need staining?

No. The brown colour is in the treatment, so the fence goes up finished. If you want to stain or seal later, wait four to six weeks for the wood to dry down, then sprinkle water on a board: absorbed within ten minutes means it is ready.

What fasteners should I use?

Hot-dipped galvanised or stainless steel ring-shank. The copper in the treatment corrodes plain and electro-galvanised fasteners. Coat any cut ends with an end-cut preservative and never burn treated offcuts.

How does it install?

Set posts at 96 in. on centre, dig to frost depth (48 in. across most of southern Ontario), and hang the panel between them with hot-dipped galvanised or stainless fasteners. Two people hang a 100 ft run in an afternoon once the posts have cured. Installation guide.

Do you deliver?

Within about 100 km of Bolton, $200 per 40 panels plus HST, and we call to book a window. Check your postal code on this page before you order; it runs the same rules as the checkout. Pickup at the yard is always free.
Ready to buy

Pay online, pick up in Bolton.

Order and pay on the site, then collect at 240 Ellwood Drive West, Bolton. We confirm your pickup time before you drive out. Custom sizes and matching gates are quoted by hand.
Pickup detailsAsk about custom